News Archives - Tuffy Security Products
VIEW OUR FAMILY OF BRANDS
Aluminess Company LogoBaja Designs Company LogoBestop Company LogoBullRing Company LogoMGP Company LogoPRP Seats Company LogoSoftopper Company LogoSpeedStrap Company Logo
sPOD Company Logo
Status Company Logo
Tuffy Company Logo

PROTECT WHAT YOU WORKED FOR: SAVE 20% + Free shipping until 09/09/26

 

 

Category: News

The Best Truck Gun Safe: How to Store a Handgun in Your Truck

Key Takeaways

  • A truck gun safe is a locked, hard-sided steel container that keeps a handgun hidden and anchored inside your vehicle, out of reach and out of sight.
  • Several placement options cover most vehicles: a console safe inside the factory console, an under-seat lockbox in the rear of a truck, a cargo-area security box for SUVs and CUVs, a truck bed box for full-size pickups like the Silverado, Sierra, Tundra, Ram, and F-Series, and a portable pistol safe that tethers with a steel cable.
  • For everyday carry, a console safe is usually best because it sits within arm’s reach of the driver’s seat and locks with a key or a mechanical combination.
  • Fit is by year, make, and model, not by trim, so confirm your exact truck and factory options like console type before you buy.
  • Most Tuffy safes install in about 30 minutes with hand tools using factory mounting points, though some models need minor drilling.

A truck gun safe is a locked, hard-sided steel container that secures a handgun inside your vehicle. It stays out of sight and anchored to the truck. Three placement types cover most drivers. A console safe locks inside your factory center console. An under-seat lockbox mounts beneath the rear bench. A portable pistol safe tethers to the vehicle with a steel security cable. Each one solves the same problem: a factory console or a plastic tray holds what matters but locks nothing. This guide covers the three types, how they fit different trucks, and how to match one to the way you carry for work or sport.

What Makes a Good Truck Gun Safe?

A good truck gun safe is locked, hidden, and anchored to the vehicle, and sized for what you carry. The best options are engineered for your specific truck, so they install cleanly and look factory from day one. Welded steel construction and a proven locking mechanism are what separate real security from a plastic tray with a padlock.

When you compare options, weigh these five criteria:

  • Locked, hidden, and anchored: The safe stays out of sight and fixes to the vehicle, so it cannot be grabbed and carried off.
  • Easy access from the seat: You can reach and open it from where you sit, without leaning or searching.
  • Sized for what you carry: It fits your handgun plus the wallet, phone, and documents you keep with it.
  • Vehicle-specific fit: It is built for your year, make, and model, so it mounts to factory points and looks stock.
  • Built to resist force: Heavy-duty cold-rolled welded steel and a patented Pry-Guard locking mechanism hold up against a pry attempt.

Console vs. Under-Seat vs. Portable: Which Truck Gun Safe Is Right for You?

Console safes, under-seat lockboxes, portable pistol safes and truck bed boxes for very large items as well as long gun and firearm storage, each suit a different driver. A console safe gives everyday drivers hidden, driver-seat access inside the factory console. An under-seat lockbox adds far more room in the rear of a truck for larger gear. A portable pistol safe tethers with a steel cable and moves between vehicles when no model-specific fit exists. The table below compares them at a glance.

Safe Type

Best For

Access

Capacity

Fit & Install

Console Safe

Everyday carry, driver-seat access

Key or combination, from the seat

About 300 to 1,400+ cu in

Vehicle-specific by YMM; most no-drill, some need drilling

Under-Seat Lockbox

Larger gear and long items, work or sport

Key or combination, from the rear seat

Up to several thousand cu in

Truck-specific; mostly no-drill via factory points

Portable Pistol Safe

Multiple vehicles or no model-specific fit

3-digit combination

Compact or full-size pistol

Universal; cable-tethered to seat frame or structure

Console Safes

A console safe fits into your existing factory center console and adds a layer of secure, lockable storage without replacing the console. We design our products to preserve as much of the OEM console’s interior volume as possible, while keeping your factory armrest, tray, and lid in place. This keeps the safe discreet and easy to access from the driver’s seat. Tuffy console gun safes hold roughly 300 to more than 1,400 cubic inches, depending on the truck. That is enough for a handgun plus a wallet, phone, and documents. Fit is by year, make, and model. Locks come in keyed, 3-digit combination, and 4-digit combination options. Most install in about 30 minutes with hand tools, and console safes start around $229.

Under-Seat Lockboxes

An under-seat lockbox is a full-width welded-steel box that mounts beneath the rear bench of a truck or UTV using factory hardware. It is hidden from view and costs you no legroom. It holds far more than a console safe, with room for rifles, optics, and long gear up to several thousand cubic inches. Under-seat lockboxes are built for trucks only. Tuffy under-seat lockboxes come in Full and 60% configurations for popular crew-cab and double-cab trucks, with keyed or combination locks and neoprene weather seals. Most mount to factory points without drilling.

Portable & Universal Pistol Safes

A portable pistol safe is the answer when no model-specific safe fits your truck yet, or when you move a handgun between vehicles. It needs no vehicle-specific fit. Tuffy portable pistol safes weigh under 3 to 4 pounds and lock with a 3-digit combination. Each anchors to a seat frame or structure with a 2-foot, 2,000-pound-test steel security cable. That keeps the handgun secured to the vehicle and out of sight. Choose a portable safe for compact pistols or a full-size pistol safe to match your firearm.

The Right Safe for Your Carry Style

The right truck gun safe depends on where you sit, what you carry, and whether a safe is made for your model. Everyday drivers who want quick reach from the seat lean toward a console safe. Drivers hauling larger gear for work or sport want the capacity of an under-seat lockbox. Drivers with several vehicles, or no model-specific fit, are best served by a portable pistol safe. Use these steps to decide.

  1. Start with reach. If you want the handgun within arm’s reach of the driver’s seat, choose a console safe.
  2. Match capacity to your load. For a handgun and small valuables, a console safe fits. For long guns and bulky gear, choose an under-seat lockbox.
  3. Confirm a safe is made for your truck. Check for a model-specific fit by year, make, and model before you commit.
  4. Pick a lock everyone who drives can use. A keyed or combination lock works well in a shared or multi-driver vehicle.

If organization matters as much as security, a security drawer adds full-extension slide-out access on top of welded steel and Pry-Guard locking. A Tuffy under-seat security drawer for the Ram 1500, F-Series and Silverado/Sierra crew cab offers more than 1,800 cubic inches. Optional dividers separate a firearm, tools, and gear.

Easy-Access Lock Options for Truck Gun Safes

Truck gun safes offer three lock types: keyed, 3-digit combination, and 4-digit combination. Each gives easy access from the seat. The choice comes down to how many people drive the vehicle and how you prefer to open it. A keyed lock is simple and familiar. A mechanical 3-digit or 4-digit combination frees you from carrying a key and lets you set your own code.

For a shared or multi-driver vehicle, a mechanical combination lock lets every authorized driver open the safe without passing a key back and forth. For a single driver who keeps things simple, a keyed lock is hard to beat. Whatever you choose, the goal is the same: easy access for you, and none for anyone else.

Truck Gun Safes by Vehicle: Fit and Install Notes

Tuffy engineers each console safe and lockbox for a specific truck, so fit is by year, make, and model, not by trim alone. Model-specific safes exist for Ram, Ford, Chevrolet, GMC, and Toyota trucks, among others. Factory options such as console type, shifter placement, and wireless charging can affect clearance, so verify your configuration before ordering. The notes below cover the most common platforms.

Ram 1500, 2500, and 3500

The Tuffy Ram console safe for 2019 to 2026 trucks offers more than 400 cubic inches inside the factory console. It requires a full-length floor console and minor drilling, and it is not compatible with Longhorn or Limited trims. For more room, a Ram crew-cab under-seat lockbox holds over 3,000 cubic inches and mounts without drilling (not compatible with Ram Classic or TRX). A Ram security drawer adds convenient slide-out access to the contents, making it easier to reach gear stored under the rear seat without having to lift the seat.

Ford F-150 and Super Duty

The Tuffy Ford F-150 console safe fits 2024 to 2026 trucks with a full-floor console and a keyed lock. Earlier F-150s from 2021 to 2024 have their own console fit. For older SuperCab and Super Duty trucks, an under-seat lockbox secures larger gear beneath the rear bench. Confirm your console type before you order.

Chevy Silverado and GMC Sierra

The Tuffy Silverado and Sierra console safe holds more than 950 cubic inches inside a flow-through console on 2019 to 2023 1500 trucks, 2020 to 2023 2500HD and 3500HD models, as well as MY’s 24,25, & 26. Crew-cab Silverado and Sierra trucks can also take an under-seat lockbox for larger loads. Check whether your truck has the flow-through console before ordering.

Toyota Tundra and Tacoma

The Tuffy Toyota Tundra console safe for 2022 to 2026 trucks holds more than 900 cubic inches and installs without drilling. Tacoma owners have model-specific console safes for the 2024 to 2026 and 2016 to 2023 generations. As always, match the safe to your exact model year.

These are common platforms, not the full list. Additional makes, models, and model years are available, so search by year, make, and model to find the fit for your truck.

How to Install and Where to Mount a Truck Gun Safe

Most Tuffy truck safes install in about 30 minutes with hand tools, using the vehicle’s factory mounting points. A console safe seats inside the existing center console, and an under-seat lockbox bolts beneath the rear bench. Some models need minor drilling where the truck offers no usable factory points, such as the Ram console safe. Always follow the install sheet for your exact year, make, and model.

Where you mount depends on the type. Console safes stay inside the factory console within reach of the driver’s seat. Under-seat lockboxes go beneath the rear bench, hidden and out of the way. Portable safes anchor to a seat frame or other solid structure with the included steel cable. This is a directional overview: the product-specific install sheet is the source of truth for hardware and steps.

Storing a Handgun in Your Truck Legally

In most places you can keep a handgun locked in your truck, and a growing number of states now regulate how firearms must be stored in unattended vehicles. Colorado’s HB 24-1348, effective January 1, 2025, requires firearms left in unattended vehicles to be stored securely, with a locked, hard-sided container as one compliant option alongside a locked trunk or a locked vehicle with the firearm out of plain view. California’s Penal Code Section 25140 requires a handgun to be stored in a locked container that is fully enclosed and locked. Laws vary and change often, so confirm your local rules. This guide is not legal advice.

A welded-steel safe that locks, stays hidden, and anchors to the vehicle is built for exactly this expectation. It keeps the firearm out of sight and secured. That holds whether your state has a secure-storage law or you simply want to lock it away when you walk off.

Why Tuffy for Truck Gun Storage

Tuffy has built vehicle-specific storage for trucks and SUVs since 1989, starting with a welded steel lockbox that fit one Jeep and actually held. That standard runs through every product today: heavy-duty cold-rolled welded steel, a patented Pry-Guard locking mechanism, and vehicle-specific fit engineered to look factory from day one. Every Tuffy safe carries a Built-for-Life warranty, and the brand is part of the Bestop Premium Accessories Group.

For truck gun storage, that means a real range of options for everyday drivers: console safes that hide inside the factory console, under-seat lockboxes for larger gear, security drawers for organized access, and portable safes for multiple vehicles. Whatever you carry for work or sport, you can lock it, leave it, and walk away without a second thought.

Ready to find the right truck gun safe for your vehicle? Explore Tuffy’s console gun safes for hidden, driver-seat access,under-seat lockboxes for larger gear, and portable pistol safes for multi-vehicle use. Then confirm the fit for your truck by year, make, and model so the safe you choose mounts cleanly and looks like it belongs.

Frequently Asked Questions About Truck Gun Safes

Common questions from drivers choosing a handgun safe for a truck, answered directly.

Is There a Gun Safe Made for a Pistol in a Truck?

Yes. Several types fit a handgun in a truck: a console safe that locks inside your factory center console, an under-seat lockbox that mounts beneath the rear bench, and a portable pistol safe that tethers to the vehicle with a steel security cable. The right one depends on your truck and how you access it.

Can I Legally Keep a Handgun Locked in My Truck?

In most places you can, and a growing number of states now require firearms left in unattended vehicles to be stored in a locked container. Colorado, for example, accepts secure options such as a locked hard-sided container, a locked trunk, or a locked vehicle with the firearm out of plain view. Laws vary by state and change often, so confirm your local secure-storage rules. A welded-steel safe that locks and stays hidden is built for exactly this.

Where Is the Best Place to Store a Handgun in a Truck?

The best spot is one that is locked, and hidden. In most trucks that means a console safe inside the factory center console for everyday carry, or an under-seat lockbox when you need more room. Both keep the firearm out of sight and secured to the vehicle.

Does a Truck Gun Safe Require Drilling to Install?

Many Tuffy console safes and under-seat lockboxes install using factory mounting points with no drilling, in roughly 30 minutes with hand tools. Some models do require you to drill mounting holes where the vehicle offers no usable factory points, so always check the fitment notes for your exact year, make, and model.

Will a Console Gun Safe Fit My Specific Truck?

Tuffy console safes are engineered per vehicle, so fit is by year, make, and model, not by trim alone. There are model-specific safes for Ram, Ford F-150, Chevy Silverado, GMC Sierra, Toyota Tundra, and Tacoma, among others. Factory options like console type or shifter can affect clearance, so verify your configuration before ordering.

How Much Can a Truck Console Safe Hold?

Capacity depends on the vehicle. Tuffy truck console safes range from roughly 300 to over 1,400 cubic inches of lockable storage, enough for a handgun plus a wallet, phone, documents, and a badge. Under-seat lockboxes hold much more, up to several thousand cubic inches for larger gear.

What Is the Difference Between a Console Safe and an Under-Seat Lockbox?

A console safe drops into your existing factory center console for easy, hidden access from the driver’s seat. An under-seat lockbox is a full-width welded-steel box that mounts under the rear seat of a truck, offering far more capacity for larger items. Many drivers run both for layered storage.

What Is the Best Easy-Access Gun Safe for a Truck?

For easy access from the driver’s seat, a console safe is usually best because it sits within arm’s reach and opens with a key or a mechanical 3-digit or 4-digit combination. If your truck lacks a compatible console safe, a cable-tethered portable pistol safe gives you a secured option.

What If There Is No Console Safe Made for My Truck?

If no vehicle-specific console safe fits your model yet, a Tuffy universal portable pistol safe is the answer. It weighs under 4 pounds, locks with a 3-digit combination, and anchors to a seat frame or structure with an included 2-foot, 2,000-pound-test steel security cable, keeping your handgun secured to the vehicle.

Toyota Tacoma Security Storage Guide: Console Safes, Gun Safes & Bed Storage

Key Takeaways

  • A Toyota Tacoma has three dedicated Tuffy security zones, a center console safe up front and a truck bed side lockbox out back, plus universal cargo drawers.
  • The Tacoma center console safe drops inside the factory console rather than replacing it, mounts to factory points with no drilling, and installs in about 30 minutes.
  • The Tacoma truck bed side lockbox adds over 710 cubic inches of lockable, weather-resistant storage, roughly double the plastic factory bin it replaces.
  • Tuffy makes generation-specific console safes for the 2005-2015, 2016-2023, and 2024-2026 Tacoma, though the 2024-2026 safe does not fit the Hybrid model.
  • Choose the console safe for everyday items kept within reach up front, and the truck bed side lockbox for larger gear you want secured in the bed.

A Toyota Tacoma gives you three smart places to lock up what matters, and the tacoma center console safe is where most owners start. Tuffy has built vehicle-specific storage since 1989, welded from heavy-duty cold-rolled steel and fitted to your exact truck. This guide covers your Toyota Tacoma security storage options. You get the center console safe up front, the truck bed side lockbox out back, and cargo drawers. Confirm the right fit by your year and model, then lock it and leave it.

What Security Storage Options Does a Toyota Tacoma Have?

A Toyota Tacoma has three dedicated Tuffy security zones. The center console safe fits inside the factory console up front. The truck bed side lockbox replaces the plastic factory bin out back. For larger loads, universal truck bed security drawers and locking bed lids add lockable cargo-area storage. There is no Tacoma under-seat lockbox, so front-cab valuables belong in the console safe.

Each zone solves a different problem. The console safe keeps a wallet, phone, or documents locked and within reach. The bed lockbox and cargo options secure tools, gear, and longer items behind welded steel. Every Tuffy safe is engineered for the Tacoma and uses the patented Pry-Guard locking system.

The real alternative most drivers weigh is a generic lockbox or an unsecured factory console. A universal box has to compromise on fit, and the stock console was never built to lock. A Tacoma safe is engineered for your truck, so it sits where it should and looks like it belongs.

That vehicle-specific fit is the whole point. You park in a lot with a laptop, a phone, firearm and the tools of your work inside. A safe that bolts to your factory points and disappears into the interior lets you walk away without a second thought.

The Tacoma Center Console Safe

The Tacoma center console safe drops into your existing factory center console and locks up what you carry up front. It fits inside the console rather than replacing the armrest, tray, or lid, so the interior keeps its stock look. It is built from heavy-duty cold-rolled welded steel with Tuffy’s patented Pry-Guard locking system.

Capacity depends on your generation. The 2016-2023 Tacoma console safe offers over 330 cubic inches of secured space and works with the fixed center console. The 2024-2026 Tacoma console safe fits the non-hybrid truck. Both install in about 30 minutes using factory mounting points, with no drilling.

Pricing starts around $229 for the standard keyed 2016-2023 console safe, with a 3-digit combination option around $259. Choose a keyed lock or a 3-digit combination, whichever you find easier to access day to day. Many owners use the safe for a wallet, phone, and documents. Others secure a handgun for work or sport when they step away from the truck.

The tacoma console safe keeps the factory look because it never touches the visible parts of your interior. Your armrest, tray, and lid stay exactly as they came from Toyota. From the driver’s seat, nothing looks different, which is part of the security.

Under that stock surface, the welded steel body and Pry-Guard locking system do the work. Pry-Guard resists the leverage attacks that defeat a plastic tray or a cable lock. It is the same engineering Tuffy has refined on trucks, SUVs, and Jeeps since 1989.

The Tacoma Truck Bed Side Lockbox

The Tacoma truck bed side lockbox replaces the plastic factory bed bin with over 710 cubic inches of lockable steel, roughly double the space. It bolts to existing factory holes with no drilling, so installation stays clean. The lid is weather-resistant, and the box mounts on the driver’s side (or the passenger side on beds without the optional power outlet).

For Tacoma bed storage that holds up, the Tacoma truck bed side lockbox fits 2005-2022 trucks. It carries the same welded steel and Pry-Guard security as the console safe. Pricing starts around $259 for the keyed version, with a 3-digit combination option around $299. See the full truck bed security lineup to compare options for your Tacoma.

The factory plastic bin was fine for a small kit, but it does not lock and it does not hold much. Swapping it for the steel lockbox roughly doubles the space and adds real security in the same footprint. You keep clean access to the rest of your bed.

The weather-resistant lid matters for a truck bed that lives outdoors. Rain, dust, and road grime stay out, so tools and gear stay ready to use. The box mounts on the driver’s side by default, with the passenger side available on beds that skip the optional power outlet.

More Tacoma Bed & Cargo Options

Beyond the side lockbox, Tuffy adds three ways to secure larger Tacoma loads. Some trruck bed security drawers slide out for organized, lockable cargo, sized by short, standard, or long beds in 10-inch or 14-inch heights.

The truck bed security drawers ride on heavy-duty ball-bearing slides and keep gear organized and locked in the bed. If you haul tools or equipment, a universal truck bed security drawer is a strong add. Pair it with the console safe to cover both the cab and the bed.

Because the drawers are universal, you match them to your bed rather than a single model year. Pick the short, standard, or long size that fits, then choose the 10-inch or 14-inch height for your load. It is a flexible option for a work truck or an overland build.

Which Tacoma Storage Should You Choose?

Choose the Tacoma center console safe for everyday items you keep within reach up front, such as a wallet, phone, documents, or a handgun. Choose the truck bed side lockbox for larger or longer gear you want secured in the bed. Many Tacoma owners run both to cover the cab and the bed together.

  • Daily carry: the console safe keeps valuables locked and within reach in the cab.
  • Work or sport firearm: the console safe holds a handgun up front, while the bed lockbox larger gear.
  • Jobsite: the truck bed side lockbox secures tools and equipment out back.
  • Overland: pair the bed lockbox or security drawers with the console safe for full coverage.

If you want a Tacoma gun safe, the choice follows the same logic. A handgun kept up front for work or sport fits the console safe, close at hand and out of sight. Larger equipment belong in the bed lockbox, where the space and the weather-resistant lid suit the load.

There is no single right answer, and plenty of owners buy both over time. Start with the zone where you carry the most, then add the other when you are ready. Either way, you are securing what you carry behind welded steel that fits your exact truck.

Zone

Best For

Capacity

Lock Options

Center Console Safe

Everyday carry up front

Varies by generation: over 330 to 340 cu in on 2005-2023 trucks, around 290 cu in on the more compact 2024-2026

Keyed or 3-digit combination

Truck Bed Side Lockbox

Larger gear in the bed

Over 710 cubic inches

Keyed or 3-digit combination

Cubby Cover

Securing gear in the cubby

Varies by vehicle and cubby size

Keyed or 3-digit combination

Tacoma Console Safe Fitment by Year and Generation

Tuffy builds a generation-specific Tacoma console safe for each major body style. Fitment is confirmed by year, make, and model, not by trim. The 2016-2023 safe needs the fixed center console, and the 2024-2026 safe does not fit the Hybrid. Use the vehicle selector to search your year, make, and model, then find your Tacoma fit before you buy.

Generation

Tuffy Model

Starting Price (Keyed)

Fitment Notes

2005-2015 Tacoma

314

~$169

Fits the factory center console; over 340 cu in

2016-2023 Tacoma

324

~$229

Fixed center console required; over 330 cu in

2024-2026 Tacoma

423

~$229

Fits the non-hybrid Tacoma; does not fit the Hybrid

For older trucks, the 2005-2015 Tacoma console safe fits the factory center console with over 340 cubic inches of space. For the current body style, the 2024-2026 Tacoma console safe fits the non-hybrid truck. Always confirm factory options that can affect console clearance by searching your year, make, and model with the vehicle selector.

Confirming fitment is the most important step, and it is quick. Seeing your exact Tacoma year, make, and model matched to a safe is what tells you the fit will look factory. That single confirmation saves you from ordering a box that was built for a different truck.

Installation and Everyday Access

Installing a Tacoma console safe is easy and takes about 30 minutes with hand tools. It mounts to factory points inside the console, with no drilling, and the truck bed side lockbox bolts to existing factory holes the same way. Some other Tuffy products and vehicles need customer-drilled holes where no factory mounting points exist.

Both lock options, keyed and 3-digit combination, are built for easy daily access. You keep the factory look inside the cab and gain welded-steel security you can rely on. For a real-world look at the process, watch the Tacoma safe install walkthrough from RobMotive.

The install is low-effort by design, which suits owners who would rather not modify their truck. You use hand tools, follow the factory points, and the safe seats where the engineering intends. When you are done, the interior looks stock and the security is built in.

A keyed lock suits owners who carry their keys and want a simple, familiar action. A 3-digit combination suits owners who would rather not manage another key. Both are backed by Tuffy’s Built-for-Life warranty, so the hardware is meant to last as long as the truck.

Ready to lock it and leave it? Search your year, make, and model with the vehicle selector to find your Tacoma fit, whether that is a center console safe or a truck bed lockbox. Built from welded steel with Pry-Guard security and a Built-for-Life warranty,Tuffy’s vehicle-specific safes are engineered to fit your exact truck and look like they belong there. Built for life. Since 1989.

Frequently Asked Questions About Toyota Tacoma Security Storage

Answers to the questions Tacoma owners ask most when choosing lockable, vehicle-specific storage.

What Security Storage Options Are Available for a Toyota Tacoma?

A Toyota Tacoma has three dedicated Tuffy security zones: a center console safe that fits inside the factory console, and a truck bed side lockbox that replaces the plastic bed storage bin. Universal truck bed security drawers and locking bed lids add cargo-area options for larger gear.

What Is the Best Gun Safe for a Toyota Tacoma?

For a handgun kept up front, the Tacoma console safe is the best fit: welded steel, Pry-Guard locking, and an OEM look inside the factory console. For larger gear in the bed, the Tacoma truck bed side lockbox offers over 710 cubic inches of lockable, weather-resistant storage.

Does a Tuffy Console Safe Fit My Tacoma’s Year?

Yes, Tuffy makes generation-specific console safes for 2005 and newer Tacomas: 2005-2015, 2016-2023 (fixed center console required), and 2024-2026. First-generation 1995-2004 trucks fall outside these ranges, though a universal floor-mounted console safe can be an option. Use the vehicle selector to confirm the correct safe for your year, make, and model before you buy.

Do You Have to Drill to Install a Tacoma Console Safe?

No. The Tacoma console safe drops into the existing factory center console and mounts using factory points with hand tools, no drilling, in roughly 30 minutes. It fits inside the console rather than replacing the factory armrest or lid, so your truck keeps its stock look and function.

How Much Lockable Storage Does a Tacoma Truck Bed Lockbox Add?

The Tuffy Tacoma truck bed side lockbox provides over 710 cubic inches of lockable storage, roughly double the factory plastic bin it replaces. It bolts to existing factory holes with no drilling, seals against weather, and mounts on the driver’s side (or the passenger side on beds without the optional power outlet).

Console Safe or Truck Bed Lockbox: Which Is Better for a Tacoma?

Choose the console safe for everyday carry kept within reach up front, such as a wallet, phone, documents, or a handgun. Choose the truck bed side lockbox for larger or longer gear you want secured out back. Many Tacoma owners run both to cover front-cab and bed storage together.

Does the Console Safe Fit the 2024-2026 Tacoma Hybrid?

No. The 2024-2026 Toyota Tacoma console safe does not fit the Hybrid model due to differences in the console layout. It fits the non-hybrid 2024-2026 Tacoma. Always confirm fitment by searching your year, make, and model with the vehicle selector, and verify factory options that can affect console clearance.

Can I Lock a Handgun in a Tacoma Console Safe?

Yes. The Tacoma console safe is welded steel with Tuffy’s Pry-Guard locking system, available with a keyed or 3-digit combination lock, making it a practical place to secure a handgun or other valuables when you leave the truck. For long guns, use the truck bed side lockbox instead.

Are Console Safes Easy to Break Into? An Honest Engineering Breakdown

Key Takeaways

  • Most vehicle break-ins are fast, opportunistic smash-and-grabs, so a console safe’s real job is to conceal your valuables and deny the quick, obvious grab that thieves count on.
  • A pry-resistant console safe wins on construction: heavy-duty cold-rolled welded steel, tight lid-to-body tolerances, and a lock geometry that gives a screwdriver or pry bar nothing to grab.
  • Steel construction matters more than any single number: welded steel resists prying and cutting far better than a plastic tray, an aluminum shell, or lightweight sheet metal.
  • A bolted-in, vehicle-specific safe removes the easiest attack of all, carrying the whole box away, while a cable-tethered portable safe remains a smart choice for multi-vehicle use.
  • To judge any vehicle safe, check the steel and welds, the lock design, the mounting, and whether it is engineered to fit your exact year, make, and model.

Are console safes easy to break into? The honest answer: a cheap plastic tray with a padlock is, but a well-built, vehicle-specific steel safe is not. Real break-in resistance comes down to three things: the steel, the lock, and how the safe is mounted.

This breakdown skips the fear and walks through the engineering. You will see how each choice changes what a thief can do in the seconds they actually have.

Are Console Safes Easy to Break Into? What Break-In Resistance Really Means

Break-in resistance is not about being unbeatable; it is about concealment and delay. Most vehicle thefts are opportunistic smash-and-grabs, so a locked steel box that hides your valuables defeats the crime most drivers actually face. Determined, tool-equipped entry is far rarer, and sound engineering makes even that attempt slow, loud, and rarely worth the effort.

Think about the difference in outcomes. An opportunistic thief has seconds and wants an easy target. If your valuables are out of sight inside a locked steel safe, most move on to an easier car.

Concealment does a lot of quiet work here. A thief cannot want what a thief cannot see, so keeping a phone, wallet, or laptop out of sight removes the temptation before it starts. A locked steel safe makes that concealment permanent, not just a jacket tossed over the seat.

So the real question is not whether a safe can ever be defeated. It is whether it defeats the theft you are actually likely to face, and whether it buys enough time to make a serious attempt pointless.

The Steel: How Construction Decides Console Safe Security

For console safe security, construction decides everything. A plastic organizer or a thin aluminum shell can be pried, punched, or peeled with a common screwdriver. Heavy-duty cold-rolled welded steel behaves differently: the walls resist deformation, welded seams hold under leverage, and there is no easy panel to bend back.

Does Steel Thickness Matter for a Vehicle Safe?

Thickness matters, but not as a single magic number. What matters more is the whole picture: welded joints instead of folded seams, and steel heavy enough to resist bending under a pry bar.

This is why Tuffy describes its build as heavy-duty cold-rolled welded steel rather than chasing a gauge number. A welded steel box distributes force across the whole structure, so a thief cannot isolate one weak panel and work it loose.

Cutting attacks tell the same story. A rotary or cutting tool struggles against welded steel, throws sparks, and makes noise that draws attention in any parking lot. The same tool goes through plastic or thin aluminum with almost no effort.

You can see this approach across Tuffy’s console safes, which are engineered as welded steel enclosures rather than bins with a lid.

Lock Mechanism Design and Pry Resistance

A lock is only as good as the geometry around it. Pry resistance comes from how tightly the lid meets the body, how the locking points engage, and how little gap a tool can exploit. A strong lock set into a loose, flimsy box still fails, while a modest lock inside a tight welded enclosure holds.

What Makes a Console Safe Pry-Resistant?

Tuffy’s answer is Pry-Guard, its patented locking system. It uses 1/8-inch-thick welded steel components at the points where a pry attack concentrates force, so the lid and body resist being wedged apart.

You also get a choice of lock types to match how you use the vehicle. Options include a keyed 10-tumbler double-bitted lock and mechanical push-button combination locks in 3-digit and 4-digit versions.

The lock also decides how you live with the safe day to day. A keyed lock keeps things simple, and a combination lock frees you from carrying a key while still giving you fast, keyless access. Each option locks into the same welded steel body.

This is what separates a genuinely pry-resistant console safe from a box that merely has a lock on it.

How a Console Safe Is Pry-Tested

Pry-testing is about thinking like an attacker and removing what they need. A thief looks for a leverage point: a gap at the lid, an exposed edge, a thin panel, or a fastener to attack. Testing applies force at each point and asks one question: does the safe give the tool anything to grab?

A well-tested design closes the obvious openings. The lid sits flush with tight tolerances, so there is no lip to catch a pry bar. Seams are welded, not folded, so they do not peel.

The mounting is part of the test, too. If the safe is bolted to the vehicle, a thief cannot simply lift it out and defeat it later at their own pace.

The goal is not a box that never yields to any tool on earth. The goal is a box that makes a quiet, quick entry impossible, which is exactly what stops real-world theft.

Construction Comparison: What Holds and What Fails

The clearest way to judge break-in resistance is to compare how different products are built. The table below lines up three common options: a plastic tray or lightweight box, a portable safe, and a welded-steel vehicle-specific safe. Each has a place, but they behave very differently when someone tries to force them open.

Attribute

Plastic Tray or Lightweight Box

Portable Safe

Welded-Steel Vehicle-Specific Safe

Material

Plastic or thin sheet metal

Steel or polymer shell, often cable-tethered

Heavy-duty cold-rolled welded steel

Joinery

Molded or riveted

Folded, spot-welded, or molded

Fully welded seams

Lid fit

Loose, with wide gaps

Tighter, varies by model

Flush, tight tolerances

Lock

Basic latch or padlock

Keyed, combination, or electronic

Patented Pry-Guard: keyed or combination

Mounting

Sits loose in the vehicle

Cable tether to an anchor point

Bolted to factory mounting points

Against opportunistic theft

Minimal; valuables often visible

Strong; conceals and deters the grab

Strong; conceals and defeats the grab

Against determined entry

Low resistance

Solid; held by the tether

High; leverage and tools find little to exploit

For real, everyday theft protection, a welded steel, vehicle-specific safe is the standard, and it’s what Tuffy is built around. When you need security that travels, Tuffy’s portable safe tethers to an anchor point and moves between vehicles, delivering that same welded steel protection in a carry-friendly form. A plastic tray only organizes; it adds no real security. So start with how you drive: if the safe stays with the vehicle, go vehicle-specific; if it needs to move with you, go portable. Either way, the answer is welded steel, not plastic.

Bolted-In vs. Portable Safes: Why Mounting Matters

Mounting is the difference most buyers overlook. A safe that bolts to the vehicle using factory mounting points cannot be carried off, so a thief must defeat it in the open. A portable safe trades that fixed strength for flexibility, staying useful across more than one vehicle.

A bolted-in, vehicle-specific safe is the strongest setup against theft. There is no box to grab and walk away with, and the factory fit means the safe sits exactly where it belongs.

A portable safe is the smart choice when you move gear between vehicles or need to carry it inside. Tethered by a cable to a solid anchor, it still conceals valuables and resists a casual grab.

Trucks have another option for larger gear. A rear under-seat lockbox, available for trucks only, mounts under the rear bench in welded steel and holds long items a console safe cannot.

What to Look for in Any Vehicle Safe

When you shop, judge the engineering, not the marketing. A few concrete signals separate a real security product from a locking bin. Use the checklist below to compare any vehicle safe on the things that actually decide whether it holds.

  • Welded steel construction: Look for heavy-duty cold-rolled welded steel, not plastic, aluminum, or folded sheet metal.
  • Tight lid tolerances: A flush lid with minimal gaps leaves a pry tool nothing to wedge into.
  • Pry-resistant lock design: The locking points and hardware should resist leverage, not just secure a latch.
  • Solid vehicle-specific mounting: A safe bolted to factory mounting points cannot be lifted out and carried away.
  • Concealment: The safe should hide your valuables and look like part of the interior.
  • Built-for-Life warranty: A lifetime warranty signals the maker stands behind the construction.
  • Verified fitment: Confirm the safe is engineered for your exact year, make, and model.

Tuffy’s vehicle-specific console safes are engineered against every point on this list, which is why they look factory and hold up under a real attack.

Where Tuffy Fits for Everyday Drivers

Tuffy has built vehicle-specific steel security since 1989, starting with a welded lockbox for a broken-into Jeep. Today that same conviction shows up in console safes for trucks, SUVs, Jeeps, and crossovers. Each one drops into your existing factory center console and locks up what you carry, so you can walk away without a second thought.

A Tuffy console safe fits inside the console you already have. It does not replace your factory insert, tray, armrest, or lid, so the interior still looks and works exactly like stock.

Installation takes about 30 minutes. Most models install using factory mounting points with no drilling, though some vehicles do require you to drill your own mounting holes.

Every safe carries the patented Pry-Guard locking system and a Built-for-Life warranty. Tuffy is part of the Bestop Premium Accessories Group.

That warranty is not a marketing line. It reflects welded steel built to outlast the vehicle it protects, so the safe you buy today keeps doing its job for years.

The lineup reaches well beyond trucks. If you drive an SUV or crossover, there is a console safe for SUVs like the Ford Explorer. The lineup also fits the Tahoe, Yukon, Suburban, Rav4, Escalade IQ, Acadia, Traverse and Expedition.

So, are console safes easy to break into? Not the well-built ones. A welded steel, vehicle-specific safe conceals what you carry and denies the quick grab that defines real-world theft.

Explore Tuffy’s console safes and confirm the exact fit for your car, truck, SUV, UTV, Bronco, and Jeep by searching your year, make, and model. Check factory options like a premium subwoofer or shifter type first, since they affect console clearance.

Frequently Asked Questions About Console Safe Security

Quick, direct answers to the questions buyers ask before trusting a console safe with what they leave in the truck.

Are Console Safes Easy to Break Into?

A quality console safe is not easy to break into. Welded steel construction, a pry-resistant lock, and a bolted-in, vehicle-specific fit defeat the smash-and-grab thefts that make up most vehicle break-ins. Thin, plastic, or loosely mounted boxes are the ones that fail.

What Makes a Console Safe Pry-Resistant?

Pry resistance comes from four things working together: welded (not folded or riveted) steel, tight tolerances that leave no gap for a tool to bite, a lock built to resist prying like Tuffy’s Pry-Guard system, and a solid mount to the vehicle so the safe cannot be twisted or pulled free.

Are Center Console Safes Worth It?

For most drivers, yes. A center console safe turns unlocked factory storage into a concealed steel compartment for wallets, electronics, documents, or a firearm. It stops opportunistic theft, hides valuables from view, and installs without changing how your interior looks or works.

Can a Thief Pry Open a Car Safe With Hand Tools?

A cheap safe can be defeated with a screwdriver or pry bar; a well-built one resists it. What matters is steel thickness, weld quality, lid-to-body tolerance, and lock design. Tuffy’s Pry-Guard locking system uses 1/8-inch-thick welded steel components specifically to deny tools the leverage they need.

Is a Bolted-In Console Safe More Secure Than a Portable One?

A bolted-in, vehicle-specific safe resists theft better because it cannot simply be carried off. Portable safes have their place for multi-vehicle use and can be cable-tethered, but a safe anchored to the vehicle’s factory mounting points removes the easiest attack: taking the whole box.

Colorado Gun Owners: Are You Ready for the New Vehicle Storage Law?

Starting January 1, 2025, Colorado’s House Bill 24-1348 goes into effect, requiring firearms left unattended in vehicles to be securely stored in a locked container or trunk and kept out of plain view. This law is designed to enhance public safety by reducing the risk of firearm thefts from vehicles.

As a trusted provider of secure storage solutions, Tuffy Security Products is here to help you comply with the new law while protecting your firearm investment. Below, we’ll walk you through some practical solutions tailored to your needs.

What Does the Law Mean for You?

Under HB 24-1348, all gun owners in Colorado must ensure their firearms are:

  • Stored in a locked container or the trunk of the vehicle.
  • Hidden from plain view to prevent theft or misuse.

Failing to comply can result in legal consequences and potential fines. More importantly, it’s about keeping your community safe and protecting your rights as a responsible gun owner.

Tuffy Security Products: Solutions You Can Trust

1. Console Safes

If you prefer a solution that integrates with your vehicle’s design, our Console Safe is an excellent choice. It’s designed to fit snugly into your existing console, providing both accessibility and security.

SHOP: Console Safes

CHEVY/GMC
2021-2024

Most Tuffy Console Safes come with an optional three-digit combination security lock for easy access.

SHOP NOW

FORD
2021-2024

Tuffy designs and manufactures the finest console safes in the industry. Convenient no drill install.

SHOP NOW

RAM
2010-2018

The Tuffy Console Safe maintains a completely stock look including full use of armrest and lid.

SHOP NOW

2. Underseat Lockboxes

Maximize unused space with a Tuffy Underseat Lockbox. This innovative design provides secure firearms storage under your rear seat in a crew cab truck, ensuring compliance with the law while saving interior space.

SHOP: Underseat Lockboxes

Chevy/GMC
2019-2024

The Tuffy lockbox mounts under the rear seat in your pickup truck. This steel lockbox has a full width design.

SHOP NOW

FORD
2015-2024

Most Tuffy Underseat Lockboxes come with an optional three-digit combination security locks.

SHOP NOW

RAM
2019-2024

Easily access your secured gear by flipping up the lid of your 60/40 split bench seat.

SHOP NOW

3. Truck Bed Security Drawers

Ideal for hunters, shooting enthusiasts, and everyday carriers, this heavy-duty security drawer provides a safe, lockable space for firearms, ammunition, and accessories. Whether you’re on the move or need secure storage in restricted areas, it offers robust protection and convenient access right from your truck bed.

Ram Security Products
SHOP: Universal Truck Bed Security Drawers

4. Cargo Area Security

Perfect for trucks and SUVs, Tuffy’s Cargo Area Security Solutions fit perfectly in your SUV cargo area or truck bed. This heavy-duty steel drawer is lockable and easy to install, offering a concealed and secure spot for your firearm.

SHOP: Cargo Area Security

Universal
MID-SIZE SUV

This heavy duty, steel drawer mounts in place of the rear seat in any vehicle with sufficient space.

SHOP NOW

FORD BRONCO
2021-2024

This heavy duty, high security, welded steel drawer mounts behind the rear seat in a 5-Door Ford Bronco.

SHOP NOW
231116_351_Medium

JEEP Wrangler
2018-2024

Secure the gear in the back of your Jeep. The storage area is secured when the tailgate is locked.

SHOP NOW

5. Portable Lockboxes 

For those who switch between vehicles or need flexibility, the Portable Lockbox is a compact option that can be secured to your vehicle’s interior. It’s lightweight, yet incredibly strong.

SHOP: Portable Lockboxes

PORTABLE SAFE FOR COMPACT PISTOLS

It’s perfect for the savvy, on-the-go gun owner who needs a little extra peace of mind while moving from place to place.

SHOP NOW

PORTABLE SAFE FOR FULL-SIZE PISTOLS

Ladies, gun owners, and all you savvy, safety-conscious adventurers—meet the portable safe that’s got your back every step of the way!

SHOP NOW

PORTABLE TACTICAL LOCKBOX

Originally designed for the US Government, these lock-boxes are engineered for high security and portability of firearms.

SHOP NOW

At Tuffy Security Products, we take your safety seriously. Explore these solutions and more to stay compliant and protected.

Conquer Every Adventure: Secure Your Essentials with the Tuffy SecureStash Underseat Drawer for Nissan Frontier (2022-2024)

When you’re behind the wheel of your Nissan Frontier (2022-2024), adventure is never far away. From weekend camping trips to job-site hauls, your truck is more than a vehicle; it’s your trusted companion. But with every journey comes the challenge of keeping your essentials secure, organized, and within reach. That’s where the Tuffy SecureStash Underseat Drawer comes in.

SHOP NOW

Why You Need the SecureStash for Nissan Frontier

The SecureStash Underseat Drawer isn’t just a storage solution—it’s a game-changer for Nissan Frontier owners who value security and convenience. Here’s how it can enhance your lifestyle:

1. For the Outdoor Adventurer

Imagine heading out on a weekend hike or fishing trip, knowing that your gear is safe and sound in your truck. The SecureStash features a weather-sealed design to keep your equipment protected from dust, dirt, and moisture. Whether you’re stashing a GPS device, fishing tackle, or emergency supplies, this drawer ensures your items are ready when you are.

Adventure Tip: Keep your trail maps, multi-tools, and snacks locked away yet easily accessible for those quick pit stops in the wild.

2. For the Busy Professional

Your Nissan Frontier doesn’t just take you to the job site; it’s your mobile office. With over 200 cubic inches of lockable storage, the SecureStash is perfect for keeping expensive tools, electronics, and important documents safe during your workday. The discreet design ensures your valuables are hidden from prying eyes, giving you peace of mind.

Workday Tip: Store your laptop, chargers, and blueprint files in the SecureStash for secure, organized transport between meetings and job sites.

3. For the Family Road-Tripper

Road trips are about making memories, not worrying about clutter or security. The SecureStash provides a safe place for stashing travel essentials like first-aid kits, spare batteries, and even kids’ tablets. The ergonomic pull lever and smooth ball-bearing slides make it easy to access your items without disrupting your trip.

Family Tip: Use the SecureStash to store games, snacks, and wipes for a stress-free family adventure.

Features That Set the SecureStash for Nissan Frontier Apart

When you choose the Tuffy SecureStash, you’re investing in top-notch security and durability. Here’s a quick breakdown of the standout features:

  • Heavy-Duty Steel Construction: Ensures your valuables are protected against tampering and theft.
  • Pry-Guard Locking System: Equipped with a 10-tumbler double-bitted lock for maximum security.
  • Weather-Resistant Design: Built-in weather seals keep dust and moisture at bay.
  • Ergonomic Access: Smooth ball-bearing slides and a convenient pull lever for effortless operation.
  • Exclusive Bolt-Blocker Bracket: Adds an extra layer of security by preventing access to mounting bolts.
  • Custom Fit: Designed to blend seamlessly with the interior of your Nissan Frontier (2022-2025).

Testimonial

“I installed the SecureStash in my 2023 Nissan Frontier, and it’s been a lifesaver. As a contractor, I’m always carrying expensive tools and paperwork. The drawer keeps everything safe and out of sight, even when I’m parked at a busy site. It’s also great for keeping my camping gear secure on the weekends!” — Jake T., Denver, CO

How to Install the SecureStash for Nissan Frontier

Installing the SecureStash is a breeze with its vehicle-specific design. The included Bolt-Blocker Bracket ensures a secure fit, while the step-by-step instructions make setup straightforward. In just minutes, you’ll have a hidden, lockable compartment ready to protect your essentials.

Why Tuffy Security Products?

Tuffy Security Products has been a trusted name in the automotive security industry for over 30 years. Known for innovative designs and uncompromising quality, Tuffy creates solutions that empower vehicle owners to safeguard their gear with confidence. The SecureStash Underseat Drawer is no exception.

Order Your SecureStash for Nissan Frontier Today

Ready to elevate your Nissan Frontier? The Tuffy SecureStash Underseat Drawer is available now. Whether you’re an adventurer, professional, or family road-tripper, this drawer is designed with your needs in mind.

Order your SecureStash today and gear up for your next adventure!

SHOP NOW

Every Bronco NEEDS this …
Tuffy Tailgate Table

What is up weekenders I’m Corbin. We’re overhauling my trunk. My trunk hasn’t really gotten a lot of attention. You can tell I just kind of throw stuff in here. I literally just have a mat, cover and that’s about it. I want to redo it and luckily my friends over at Tuffy have some solutions for that.

Today, we’re actually going to tackle the tailgate. We’re going to put a tailgate table there. I think I need a table. I do a lot of camping and repairs Off-road, so, I think a little table would be kind of rad. We’re going to check out the Tuffy tailgate table and get that guy installed. Let’s tackle this.

Unboxing

Here’s everything that comes with the kit. It’s pretty self-explanatory. It comes with very detailed instructions, a little top frame, the actual frame for the table the table itself, a bunch of hardware, a drill bit because this is going to require you to drill into your body so it is a little bit permanent. They do provide the drill bit you are going to need a drill and an allen key for some of these bolts. Then they provide all the little rubber washers and everything that you’re going to need.

Installation

Get these panels on and actually drill some holes so that we can get those rib nuts going. The table’s rated for 25 lbs. which seems like it could be pretty good. That’s enough for you know any kind of grill or tools that you want to put on here camping and stuff. I think it’s pretty good. It seems pretty quality and does have holes in it for Molle, so when it’s actually closed you could have Molle bags and whatnot attached to it. Pretty decent little quality clamps which is nice to see.

Anyways, let’s get these panels on. We’re going to pull off the panel so you’re just going to want to pull it from the bottom and there’s actually full tabs. It’s kind of violent but yeah you pull from the bottom. It kind of lifts out. It has these tabs I’ve already broken a bunch , so don’t do that! Pull it from the bottom. Once you have this plastic piece off you’re actually going to grab some of these rubber grommets or bushings whatever you want to call them, that come with a kit and you’re going to go ahead you’re going to put them into the top four slots. You’re actually going to have them facing the top of the holes and then these bigger ones are going to go on these larger slit or openings down at the bottom. Those are going to go on the bottom of the hole.

Once you have those little rubber bushings on there you’re going to grab this top piece and you see it actually has some tabs. Those tabs are just going to slide into those holes up top. It should just fit in. A nice snug fit nice very nice. Then you’re going to go ahead and grab the outer frame. The outer frame does have more hooks at the bottom. Those are going to go in the larger holes on the bottom. It does have one side that’s not attached. Don’t worry about that, that’s how it’s supposed to be. One side has a rivet and this will get bolted down after the fact but we’re going to go ahead you’re just going to slide this in and get it lined up with the top bracket.

You’ll see that there are some holes along here that it’s going to line up with this bracket, with the two brackets that’s actually going to bolt together along with two holes out here on the side. You’re going to go ahead and find the three screws that are going to go up top here. Then you’ll have two that will go on either side with the nut.

Okay, now that this is loosely put on with the hardware just kind of sitting in there you don’t need to go ahead and fully tighten it down ‘cuz we’re actually going to be taking this apart. You’re going to go ahead and we’re actually just going to go ahead and mark the holes now. Make sure that all these brackets line up and then you’re going to want want to find the four holes in the corners. Mark those holes on your body. You can use a Sharpie.

So, This Is The Moment of Truth.

Go ahead and drill this guy up. It does come with a drill stop. If you want, you can go ahead put the drill stop on here, so you don’t actually go through and hit your body. I’m going to go ahead and tighten this guy down on the drill bit and then we’ll just drill out these holes that we just marked. Okay then, you’re going to go ahead and locate the riv nuts. They also give you a little bit of grease to put on them because you are just going to kind of have to tap them in there slightly. They are kind of interference fit and then once you have it on the rivnut actually inside the Bronco tailgate you’ll take this little tool and kind of put it over the rib nut and then you’re going to go ahead and tighten down the screw with your Allen key. You’re going to do that until it’s nice and snug and doesn’t spin anymore.

You do not want to over tighten it ‘cuz it will spin and then it will be loose. So, it’s kind of finding that fine tuned spot for these.  All right, now we’re going to go ahead and start temporarily putting this stuff back in place. You can go ahead and put it in place but don’t fully start putting it together yet because we’re going to have to start putting some plastic washers and lock washers in certain areas. I went ahead and installed the three screws up top and the two screws and nuts on the side of the brackets because they do not require washers and it will hold it all in place from here on out.

You need to add some washers and it needs two of the black washers on the top two bolts that go into the riv nuts and then it’s going to use a lock ring on the outside to hold it all together. For the bottom set of bolts you’re going to use just one of the black washers in a lock ring except for the side that was loose, if you remember, I said that this side was loose you’re actually going to want to go ahead and you’re going to throw in the white washer in between the two parts so in between the loose part and the actual frame itself.

You will still put a washer on the back and a lock ring on the front but you will just include the little white washer. You’ll have two other white washers but those will be saved for the actual table once we install that. Okay, so now before you install this last bolt that goes into the rib nuts you’re actually going to want to install the table. That’s why it is detached so that it can flex out a little bit so that you can actually put the table in. You’ll notice these holes on the side of the table, you’re just going to go ahead put one of these washers on the little tab and you’re going on either side and then go ahead and slide the table on. You can take the little string for the table and hook it up into its respective hook. Once it’s on then we’ll go ahead and finish installing that last bolt.

All right, there is the Tuffy tailgate table for your 6th gen Bronco. I think it’s a nice table. It’s a quality build. It doesn’t rattle. I’ve been using it for the last few days and out here Off-road. It’s useful. You can put anything that you need on it. I’ve been using it to put like camping stuff and tools on top of and it’s a sweet little table. There you go, simple install, useful tool.
– Weekends & Waypoints

Convenience Is Key
Tuffy Cargo Security Drawer

Addressing the back end of the Bronco, this is the Tuffy Products drawer system. I’ve been needing something in the back of my Bronco to store like tools, spare parts like CV axles and whatnot so this is going to be a really nice thing to have in the back of the Bronco so stuff just isn’t flying around. I want to show you guys how this is installed and then I’ll give you guys my thoughts.

First step is we’re going to have to unbox it. The box is pretty big, it’s pretty heavy so let’s jump in the unboxing. So, we have the drawer system all taken out here and it comes pretty well put together with all the hardware and instructions inside of it. Locate all your hardware and keys to open it. It has a bar underneath just for shipping so we’re going to go ahead and take that off.

So, now we’re in the back of the Bronco. Looking at the nice detailed instructions we’re going to have to go ahead and take apart these Factory hooks that are in your trunk. It’s pretty simple to do you just kind of unhook the plastic and then we are going to unbolt these hooks. Once you have the hooks out, we’re just going to do that for all four corners.

Once you have all the factory hooks taken out of these spots, you’re going to go ahead and we’re going to screw the standoffs in. Doesn’t matter which way they go they’re the same on both sides. You do have to pay attention to which orientation they’re going to be in or which hole they’re going to be in so for the ones that are closest to the trunk you’re going to want have them facing forward and then in the rear you’re going to want to have them facing towards the trunk. You want both standoffs to be facing in board of the trunk and you’re only going to put one in each corner.

Now that you got the standoffs in we’re going to go ahead back to the drawer open it up. We’re going to take this drawer out so that we can get access to the bolts. To take it out you’re going to want to go ahead and push the release arms on both slides as you pull out and the drawer should just slide out.

Now that you have the drawer out, carefully pick it up and place it into the back of the Bronco. Then we’ll go ahead and try to line up these standoffs. Once you have the drawer system actually on top of the standoffs it’s kind of hard to see but the standoffs will go through holes up underneath the drawer system in all four corners. Take the nut and washer that come with them and you’re going to layer them up, install them and tighten them down. I promise, the standoff is sticking up underneath there and it’s going to be like that way in all four corners. The far ones you’re going to reach back up in there. Go ahead and tighten these up.

Next Step. You’re going to reuse the hooks that you took out of the floor of your trunk. The drawer has these nice spots right over here for them to be put back in with these screws. Go ahead and screw these guys into place. This way we have a nice place to tie stuff down with. Careful, don’t overtighten.

You can still get access to your under drawer storage, so if you ever wanted to you could just take the drawer out throw it on top or onto the ground and you can actually still get up underneath there and get to all your stuff that you want to have under there. It is going to be a little bit more difficult to get to it so I would only put stuff that you’re not going to use on a daily basis, like emergency stuff.

Go ahead and throw the drawer in and we’ll be done. Once the drawer is in it does take a little bit of finagling here with the side hinges you you do kind of need to finagle one side in and then the other side it might take two people to actually do it. Ours is a little tight uh but I think it should work out in the future. Maybe I just need to loosen up the bolts but it does work.

It does actually have here on the inside these nice dividers so you have a bunch of compartments that you could use for whatever you need. These ones actually bolted in over here which is nice. If you want to take them out, you just unbolt them. The drawer is felt lined on the bottom and seems pretty solid.

I’m going to load it up with a bunch of stuff and we should be good to go. All right, there we go. Pretty simple install for the Tuffy drawer system for the sixth gen Broncos. I think it’s pretty awesome I’ve been using it for a few days now. I’ve been cramming a bunch of stuff in it and it’s it’s working well. I mean you’re going to be able to put spare parts in there, tools, pretty much anything extra that you don’t want floating around. I used to just have a bunch of stuff floating around so it’s pretty nice to have somewhere to put it.

I have taken out the center slots and I’m just using three sections cuz I think that’s really all I need. I actually went ahead and put a little foam in there too, just to dampen any noise of loose stuff rattling around. You know I got some camera gear and whatnot in here. You don’t have to go ahead and put foam in here. It’s a really quiet system. Honestly, before that I just went ahead and did it more or less just to protect the metal and the coating a little bit. You know protect my stuff that’s in here.

It is felt lined on the bottom and this thing has some pretty sturdy rails. You’re not going to be able to push this thing down. This thing has a pretty heavy load rating, if I had to guess. It is lockable and it’s got a pretty stout locking system and latch. So, if you do want to lock it up, that is nice to have. You don’t really need to, in my opinion, because when it’s closed and your tailgate is locked it’s not like anyone can open it anyways but who knows. Maybe if you had the tailgate open and you want to show off some stuff, you’d want to have this locked and that’s an option. So yeah, there we go guys this is the Tuffy drawer system for the Ford Bronco.

-Weekends & Waypoints

Exploring Moab’s Stunning Scenery During Easter Jeep Safari | Mineral Bottom Trail

Gone_GPN
Apr 21, 2024

 

A winding shelf road, uranium mine, historical rock inscription, helicopters, goats, and an engine cooked burrito. The Gone-Gpn crew, four subscribers and friends from @Jeeptalkshow , @tuffyproductsofficial, @hopliteventuretreksoffroad2830, and @roamingreckless hit the trail for the third annual Gone-Gpn trail ride! For some of the crew Easter Jeep Safari can be a lot of work, guiding trails, teaching classes, filming, and photographing the Jeep Concepts.

The team trail ride is our time to relax, see the sights and put dirt under our tires. This year, Chris took the lead in his Expedicion De Las Americas CJ7 and guided the team down Mineral Bottom to a uranium mine, then deep in to Hell Roaring Canyon to see an 1836 rock inscription by Denis Julien. The trail was mild but the views were spectacular! Another Easter Jeep Safari for the books!

Tuffy Ford Under Seat Lock Box and Console Safe Review

Tuffy gets Jonathan’s take about the Ford Console Safe and Under Seat Lockbox installed in his Ford F150.

Hi, my name is Jonathan. I’m here to talk about a couple of really awesome products that I have installed in my truck. It’s a 2021 Ford F150 and I have two products made by Tuffy.

The first product is a center console safe. The second product is a rear seat storage safe that I have in the back of my truck. If I need to take it out of the back, it’s very easy to remove.

I keep usually rifles in there but if there is anything valuable I always lock that up as well. In the center console I keep a forty-five. When travelling, it’s just always nice to have because, one, I don’t want my kids to get involved and it gives me a ton of peace of mind with my kids.

I have three kids ranging from the age of nine to fourteen. They can always be curious. Even though I know they would never want to handle a firearm, it’s peace of mind for myself and my wife that we’ll never put them in danger.

Very high quality. You can tell that a lot of time and effort got put into designing it. A lot of time and effort got put into making the product.

It’s a great product. It’s extremely strong. It’s extremely durable. Definitely feel like it’s going to last the life of the vehicle and longer.

Tuffy Ford F150 Products

#ford #F150 #tuffyproducts #review #reviews #tuffysecurity #tuffyconsole #tuffysecurity

Security First

Since 1989, Tuffy Security Products has been the industry leader in secure vehicle storage products.

Learn More

Simple Installation

Life is complicated, but Tuffy simplifies it with products that install easily using simple tools, providing top-notch security and organization for your peace of mind.

Learn More

Built for Life

We build Tuffy Products to last a lifetime, and we stand behind them just as long, with a full warranty against defects in material and workmanship.

Learn More